Biohythane production from organic wastes: present state of art

The economy of an industrialized country is greatly dependent on fossil fuels. However, these nonrenewable sources of energy are nearing the brink of extinction. Moreover, the reliance on these fuels has led to increased levels of pollution which have caused serious adverse impacts on the environment. Hydrogen has emerged as a promising alternative since it does not produce CO₂ during combustion and also has the highest calorific value. The biohythane process comprises of biohydrogen production followed by biomethanation. Biological H₂ production has an edge over its chemical counterpart mainly because it is environmentally benign. Maximization of gaseous energy recovery could be achieved by integrating dark fermentative hydrogen production followed by biomethanation. Intensive research work has already been carried out on the advancement of biohydrogen production processes, such as the development of suitable microbial consortium (mesophiles or thermophiles), genetically modified microorganism, improvement of the reactor designs, use of different solid matrices for the immobilization of whole cells, and development of two-stage process for higher rate of H₂ production. Scale-up studies of the dark fermentation process was successfully carried out in 20- and 800-L reactors. However, the total gaseous energy recovery for two stage process was found to be 53.6 %. From single-stage H₂ production, gaseous energy recovery was only 28 %. Thus, two-stage systems not only help in improving gaseous energy recovery but also can make biohythane (mixture of H₂ and CH₄) concept commercially feasible.     

Identification of brake wear particles and derivation of a quantitative tracer for brake dust at a major road

Traffic-generated air pollutant emissions can be classified into exhaust and non-exhaust emissions. Increased attention is focussing on non-exhaust emissions as exhaust emissions are progressively limited by regulations. To characterise metal-rich emission from abrasion processes, size-segregated analysis of atmospheric aerosol particles sampled with micro-orifice uniform deposit impactors (MOUDI) in March 2007 in London was performed. The samples were collected at a roadside and a background site and were analysed for Al, Ba, Cu, Fe, Sb, Ti, V, Zn, Ca²⁺, K⁺, Mg²⁺, Na⁺, and NH₄⁺. Most components showed a clear roadside increment, which was evident as a higher mass concentration and a change in the size distribution. In particular, Fe, Cu, Ba, and Sb correlated highly, indicative of a common traffic-related source. Using complementary information on the fleet composition, vehicle number and average speed, the brake wear emission was calculated using the EMEP/CORINAIR emission database. The total PM₁₀ and barium emission of the traffic was determined by ratio to NO_x whose source strength was estimated from published emission factors. Barium was found to comprise 1.1% of brake wear (PM₁₀) particles from the traffic fleet as a whole, allowing its use as a quantitative tracer of brake wear emissions at other traffic-influenced sites.     

Apparatus for Simultaneous Size-Differentiated Sampling of Optical and Suboptical Aerosols: Application to Analysis of Nitrates and Sulfates

In recent years, the EPA has moved toward a risk assessment/risk reduction framework for making regulatory decisions. The Agency has taken a number of steps to assure the quality and consistency of the risk assessment component of those decisions. The first, and perhaps most important of these steps, is the development of Agency-wide risk assessment guidelines. Five guidelines have been published. They are: carcinogenicity, mutagenicity, developmental toxicity, chemical mixtures, and exposure. The provisions of the five guidelines are discussed in the context of the four components of risk assessment. Other activities designed to assure quality and consistency in risk assessments, reduce uncertainty in risk assessment, ensure a more efficient information exchange about risk and risk assessment, and develop the appropriate oversight mechanisms are also discussed. These include additional guidelines, the Risk Assessment Forum, risk assessment research, the Integrated Risk Information System, the Hazard Assessment Notification System, and the Risk Assessment Council.     

Airborne Emissions of Mercury from Municipal Solid Waste. I: New Measurements from Six Operating Landfills in Florida

Abstract

Mercury-bearing material enters municipal landfills from a wide array of sources, including fluorescent lights, batteries, electrical switches, thermometers, and general waste; however, the fate of mercury (Hg) in landfills has not been widely studied. Using automated flux chambers and downwind atmospheric sampling, we quantified the primary pathways of Hg vapor releases to the atmosphere at six municipal landfill operations in Florida. These pathways included landfill gas (LFG) releases from active vent systems, passive emissions from landfill surface covers, and emissions from daily activities at each working face (WF). We spiked the WF at two sites with known Hg sources; these were readily detected downwind, and were used to test our emission modeling approaches. Gaseous elemental mercury (Hg⁰) was released to the atmosphere at readily detectable rates from all sources measured; rates ranged from ～1–10 ng m^?2 hr^?1 over aged landfill cover, from ～8–20 mg/hr from LFG flares (LFG included Hg⁰ at μg/m³ concentrations), and from ～200–400 mg/hr at the WF. These fluxes exceed our earlier published estimates. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg⁰, the entire waste mass acts as a source. We estimate that atmospheric Hg releases from municipal landfill operations in the state of Florida are on the order of 10–50 kg/yr, substantially larger than our original estimates, but still a small fraction of current overall anthropogenic losses.     

Malathion-induced sublethal toxicity on the intestine of cricket frog (Fejervarya limnocharis)

The effect of malathion [diethyl(dimethoxythiophosphorylthio)succinate] at sublethal concentration (0.006 ppm) on intestinal parameters of cricket frog (Fejervarya limnocharis) was studied for 24 hrs to 240 hrs of exposure and remarkable histopathological alterations were observed. The study on intestinal parameters revealed acute pathological conditions in the intestinal wall. The toxic effect became evident as the cytoplasm of the cells disintegrated and the cells became empty and vacuolated. The cell membranes were also ruptured. Degenerative changes of the absorptive surface (villi) of the intestine in the different periods of exposure were pronounced. Severe atrophic nature (necrotic mucosa) of the intestine began from 48 hrs onwards to 96 hrs of exposure.     

Sustainability of rice production systems: an empirical evaluation to improve policy

An evaluation is needed to monitor the progress of sustainable development (SD) in rice production systems. The purpose of this study is to provide policy inputs, examine the sustainability of rice production, and determine major policy areas. A requisite set of 12 indicators of three dimensions of SD, namely economic, was generated by employing an assemblage of top–down and bottom–up approaches. The data were gathered from farm households’ survey as well as in-depth discussion with stakeholders from the regions that represent irrigated, rain-fed lowland, rain-fed upland, flood-prone, and saline-prone rice-growing ecosystems in Bangladesh. By constructing composite indicators, the results revealed that 44 % of rice growers were economically viable, environmentally sound, and socially developed. The irrigated rice production system was found to be the most sustainable. The path analysis measured the contribution of the indicators to the index, and results highlighted that rice growers’ knowledge, skills, and social networks development, improving land productivity, and integrated nutrient management were essential for promoting sustainable rice production. However, the study findings suggest that pluralistic (i.e., government and non-government) agricultural advisory services can serve as an engine of transition to rice production sustainability in which a multi-year planning and strategy formulation are crucial besides investing in the modernization of extension services. Overall and ecosystem-specific policy implications that emerged from the findings of this study are outlined.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Transformation of a non-oestrogenic steroid metabolite to an oestrogenically active substance by minimal bacterial activity

The majority of oestrogenic material excreted from humans and wildlife, and therefore released into sewers, is in a conjugated form. However, the finding of “free” oestrogens in sewage effluent suggests that these metabolites are somehow converted back into an active form, before or during passage through a sewage treatment process. When male fathead minnows (Pimephales promelas) were continuously exposed to oestradiol-3-glucuronide, in a continuous-flow system, it demonstrated no inherent oestrogenic activity. However, when fish were exposed to effluent generated from laboratory simulations of sewage treatment processes, to which had been added oestradiol-3-glucuronide, oestrogenic activity was observed, suggesting microbial activity was capable of degrading the steroid metabolite into a more potent oestrogen. Oestrogenic potency was determined by measuring changes in plasma vitellogenin (egg yolk precursor) concentrations and gonadosomatic index. The results suggest that inactive metabolites of steroids are very readily biotransformed into biologically active oestrogens.